SONIA REGINA HOMEM DE MELLO CASTANHO

Resumo

Graduada em Engenharia de Materiais (UFSCar, Universidade Federal de São Carlos), Mestre em Tecnologia Nuclear (IPEN/USP, Universidade de São Paulo) e Doutora em Ciências Químicas-Cerâmicos (UAM/ES -ICV/CSIC, Universidad Autónoma de Madrid, Espanha e Instituto de Ceramica y Vidrio/CSIC de Espanha). Ela é Pesquisadora Senior e atualmente Gestora Adjunta em Pesquisa e Desenvolvimento do Centro de Ciências e Tecnologia de Materiais (CCTM) do Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP). É Professora da Universidade de São Paulo (USP), no programa de posgraduação Tecnologia Nuclear - Materiais. Coordenadora do grupo de pesquisas (GP/CNPq) em Materiais e Meio Ambiente. Principais áreas de atuação: - Energias Renováveis (células a combustível, catalizadores e biomassa), - Ambiental (mitigação, inertização e requalificação de efluentes e subprodutos de processos extrativistas e industriais, diretivas ambientais (RhOS, WEEE)), - Cerâmicas Biocompatíveis (vidros, compósitos multifuncionais para a implantologia). Experiência em gestão de Centro de Pesquisas, gestão ambiental, gestão de projetos, planejamento composicional de materiais, processamento coloidal, reologia, vidros e vitroceramicos, compósitos multifuncionais e nanoestruturas naturais. (Texto extraído do Currículo Lattes em 27 dez. 2021)

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 3 de 3
  • Artigo IPEN-doc 28822
    Structural and thermal influence of niobia in aluminoborosilicate glasses
    2022 - COSTA-SILVA, D.L.; BARTOLOME, J.F.; SILVA, A.C.; MELLO-CASTANHO, S.
    The addition of small amounts of niobia (Nb2O5) in borosilicate glasses was explored. By analysis on thermal and structural changes, we found evidences that niobium integrates the glass structure in octahedral NbO6 coordination. Adding up to 8.0 mol% of Nb2O5, the oxide partially ruptured the glass structure, interfering in the BO3/ BO4 ratio, but the predominant network configuration was maintained. Thermally, there was an increase in the processing interval and the glasses became more resistant against crystallization, with the presence of niobia. Also, the oxide contributed to a notable decrease in the viscosity of the melts. The improvement of such properties were obtained by the controlled dispersion of the oxide in the glass network structure, avoiding large areas of phase-to-phase separation to preserve the desired ability of these glasses to incorporate a wide range of elements.
  • Artigo IPEN-doc 27172
    Tribological and mechanical behaviour of 45S5 Bioglass®-based compositions containing alumina and strontium
    2020 - ARAUJO, M.S.; BARTOLOMÉ, J.F.; MELLO-CASTANHO, S.
    Although bioactive glasses have been widely used for the surfaces of orthopaedic and dental implants, its limited mechanical strength, low toughness and wear resistance have prevented their use as load-bearing devices. Considering that even a small variation in the composition of such materials can deeply modify their features, inducing very different physicochemical or mechanical properties, the present research was conducted by modifying the glass network of 45S5 Bioglass® by adding Al2O3 and SrO to obtain a highly bioactive glass with improved mechanical and tribological performance for biomedical applications. The addition of 2% Al2O3 and 2% SrO produced a dense material with the same elastic modulus as 45S5 (~50 GPa). Moreover, the bending strength increased by 60% and the toughness doubled. The wear rate obtained against steel was found to be three times lower than that of 45S5. From the results, it can be assumed that both alumina and strontium synergistically play crucial roles in the mechanical and tribological properties of these new bioactive glasses.
  • Artigo IPEN-doc 11198
    Synthesis, thermal evolution, and luminescence properties of yttrium disilicate host matrix
    2005 - DIAZ, M.; PECHARROMAN, C.; MONTE, F. DEL; SANZ, J.; IGLESIAS, J.E.; MOYA, J.S.; YAMAGATA, C.; CASTANHO, S.R.H.M.