SONIA REGINA HOMEM DE MELLO CASTANHO

SONIA REGINA HOMEM DE MELLO CASTANHO

(Fonte: Lattes)

ORCID

ScopusID

ResearcherID

Resumo

Graduada em Engenharia de Materiais (UFSCar, Universidade Federal de São Carlos), Mestre em Tecnologia Nuclear (IPEN/USP, Universidade de São Paulo) e Doutora em Ciências Químicas-Cerâmicos (UAM/ES -ICV/CSIC, Universidad Autónoma de Madrid, Espanha e Instituto de Ceramica y Vidrio/CSIC de Espanha). Ela é Pesquisadora Senior e atualmente Gestora Adjunta em Pesquisa e Desenvolvimento do Centro de Ciências e Tecnologia de Materiais (CCTM) do Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP). É Professora da Universidade de São Paulo (USP), no programa de posgraduação Tecnologia Nuclear - Materiais. Coordenadora do grupo de pesquisas (GP/CNPq) em Materiais e Meio Ambiente. Principais áreas de atuação: - Energias Renováveis (células a combustível, catalizadores e biomassa), - Ambiental (mitigação, inertização e requalificação de efluentes e subprodutos de processos extrativistas e industriais, diretivas ambientais (RhOS, WEEE)), - Cerâmicas Biocompatíveis (vidros, compósitos multifuncionais para a implantologia). Experiência em gestão de Centro de Pesquisas, gestão ambiental, gestão de projetos, planejamento composicional de materiais, processamento coloidal, reologia, vidros e vitroceramicos, compósitos multifuncionais e nanoestruturas naturais. (Texto extraído do Currículo Lattes em 27 dez. 2021)

Página do item completo

Resultados de Busca

Agora exibindo 1 - 2 de 2

Micrograded ceramic-metal composites
2019 - RESTIVO, THOMAZ A.G.; BECCARI, RAFAEL F.; PADILHA, WELLINGTON R.; DURAZZO, MICHELANGELO; TELLES, VICTOR B.; COLETI, JORGE; YAMAGATA, CHIEKO; SILVA, ANTONIO C. da; SUZUKI, EDUARDO; TENORIO, JORGE A.S.; MELLO-CASTANHO, SONIA R.H.
The article shows new designed cermets and processes concerning primary to applications as thermal insulation materials with low emissivity. A new projected microstructure was obtained where dense regions (micropellets) rest inside the main porous pellet. The feature resembles a frozen hypercube, therefore such architecture is called hyper-pellet/ cermet. The processing method to obtain the hyper-cermet is based on sequential tape castings and sintering techniques. Ni-zirconia lamellae were prepared by a special mechanochemical process followed by sintering, which remain inside the main pellets as a dense region. The whole pellet is turned to be porous by employing pore-forming additives. All the constituents and porosity shapes are aligned along the disc/ flake planes. Thermal conductivity is estimated for the materials up to 800 °C by a flash diffusivimeter. Ceramographic analyses show graded density regions with directional constituents and pores. Applications of such materials are foreseen as temperature insulation materials and thermal radiation shields.
Tape casting of strontium and cobalt doped lanthanum chromite suspensions
2010 - SETZ, LUIZ F.G.; SANTACRUZ, ISABEL; COLOMER, M.T.; MELLO CASTANHO, SONIA R.H.; MORENO, RODRIGO
Lanthanum chromite (LaCrO3) is currently the most widely studied material as interconnector layers for solid oxide fuel cells (SOFC). The complexity of microstructures and geometries of SOFC devices, which are usually built-up by lamination of the different constitutive layers, make it necessary a precise control of processing parameters to achieve the desired combination of properties. Much effort has been devoted to the processing of electrodes and electrolytes but the other layers, such as that of interconnecting material, have received scarce attention. This work deals with the preparation and optimisation of the rheological behaviour of concentrated suspensions of Sr- and Co-doped LaCrO3 and the subsequent tape casting to produce homogeneous thin sheets to be used in the SOFC stack. The starting powder was produced by combustion synthesis from the corresponding nitrates and urea as a fuel, and had a final composition of La0.80Sr0.20Cr0.92Co0.08O3. These powders were dispersed in ethanol with commercial copolymers (Hypermer, KD6) to solids loading of up to 58wt%. The binding system (BS) consisted of a mixture of a binder, polyvinyl butyral-co-vinyl alcohol-co-vinyl acetate (PVA-PVAc), and two plasticizers, polyethyleneglycol (PEG400) and benzylbutylphthalate (BBP). The effect of the binding system content and the binder-to-plasticizer ratio on the tape casting performance and the characteristics of the green and the sintered tapes, were studied, as well as the influence of the casting parameters (casting speed and blades height).