SONIA REGINA HOMEM DE MELLO CASTANHO

SONIA REGINA HOMEM DE MELLO CASTANHO

(Fonte: Lattes)

ORCID

ScopusID

ResearcherID

Resumo

Graduada em Engenharia de Materiais (UFSCar, Universidade Federal de São Carlos), Mestre em Tecnologia Nuclear (IPEN/USP, Universidade de São Paulo) e Doutora em Ciências Químicas-Cerâmicos (UAM/ES -ICV/CSIC, Universidad Autónoma de Madrid, Espanha e Instituto de Ceramica y Vidrio/CSIC de Espanha). Ela é Pesquisadora Senior e atualmente Gestora Adjunta em Pesquisa e Desenvolvimento do Centro de Ciências e Tecnologia de Materiais (CCTM) do Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP). É Professora da Universidade de São Paulo (USP), no programa de posgraduação Tecnologia Nuclear - Materiais. Coordenadora do grupo de pesquisas (GP/CNPq) em Materiais e Meio Ambiente. Principais áreas de atuação: - Energias Renováveis (células a combustível, catalizadores e biomassa), - Ambiental (mitigação, inertização e requalificação de efluentes e subprodutos de processos extrativistas e industriais, diretivas ambientais (RhOS, WEEE)), - Cerâmicas Biocompatíveis (vidros, compósitos multifuncionais para a implantologia). Experiência em gestão de Centro de Pesquisas, gestão ambiental, gestão de projetos, planejamento composicional de materiais, processamento coloidal, reologia, vidros e vitroceramicos, compósitos multifuncionais e nanoestruturas naturais. (Texto extraído do Currículo Lattes em 27 dez. 2021)

Página do item completo

Resultados de Busca

Agora exibindo 1 - 7 de 7

Impact of distinct sintering temperatures in pellets to strontium immobilization
2024 - SANCHES, G.O.P.; ARAUJO, M.S.; MELLO-CASTANHO, S.R.
The immobilization of radioactive strontium (Sr) from liquid effluents, a byproduct of nuclear fission and accidents, presents significant environmental and public health challenges. This study evaluates the immobilization of Sr in a glass matrix by comparing the effects of different sintering temperatures. The analyses started from three temperatures 800ºC, 900ºC and 1000ºC for each of the four compositions, which vary the addition of niobium (Nb) content in the vitreous matrix by 2%, 4%, 6% and 8% in mol. The highest temperature was excluded because its deformation did not match the final objective, at 900ºC the compositions had better results in density and water absorption, so that at the same temperature the composition with 4% niobium responded better to the results. The study underscores the significance of treating temperature and Nb content in the glass matrix for effective Sr immobilization, offering valuable insights for the development of safe and sustainable nuclear waste management strategies.
Structural and thermal influence of niobia in aluminoborosilicate glasses
2022 - COSTA-SILVA, D.L.; BARTOLOME, J.F.; SILVA, A.C.; MELLO-CASTANHO, S.
The addition of small amounts of niobia (Nb2O5) in borosilicate glasses was explored. By analysis on thermal and structural changes, we found evidences that niobium integrates the glass structure in octahedral NbO6 coordination. Adding up to 8.0 mol% of Nb2O5, the oxide partially ruptured the glass structure, interfering in the BO3/ BO4 ratio, but the predominant network configuration was maintained. Thermally, there was an increase in the processing interval and the glasses became more resistant against crystallization, with the presence of niobia. Also, the oxide contributed to a notable decrease in the viscosity of the melts. The improvement of such properties were obtained by the controlled dispersion of the oxide in the glass network structure, avoiding large areas of phase-to-phase separation to preserve the desired ability of these glasses to incorporate a wide range of elements.
In vitro bioactivity and antibacterial capacity of 45S5 Bioglass®-based compositions containing alumina and strontium
2021 - ARAUJO, M.S.; SILVA, A.C.; CABAL, B.; BARTOLOME, J.F.; MELLO-CASTANHO, S.
A modified 45S5 Bioglass® containing 2 mol% alumina and 2 mol% strontium oxide was prepared. In vitro bioactivity in powder and monolithic samples was conducted. Fourier transform infrared analysis and pH change in simulated body fluid were investigated for powder samples after 480 min of immersion. Additionally, X-ray diffraction and scanning electron microscopy after 7 and 14 days of immersion in simulated body fluid were investigated for monolithic samples. The formation of phosphate and carbonate phase precursors of hydroxycarbonate apatite was observed after 480 min for powder samples, and the hydroxycarbonate apatite pattern and morphology were confirmed after 7 days of immersion for monolithic samples. It seems that changes in composition did not affect reactivity but caused a decrease in the maxima of pH. Cytotoxicity and cell viability obtained by using the NCTC clone 929 cell line did not show any significant loss of cell viability or cytotoxicity. Moreover, after overnight incubation, the samples demonstrated safe disinfection for Escherichia coli. For these reasons, the use of these new bioactive glasses can be considered a promising alternative for the reconstruction of bone defects and even for the treatment and suppression of bone infections.
Mechanical and nuclear properties of soda-lime glasses containing boron and niobia
2021 - SILVA, DANILO C.; CASTANHO, SONIA M.; VICENTE, ROBERTO
Tribological and mechanical behaviour of 45S5 Bioglass®-based compositions containing alumina and strontium
2020 - ARAUJO, M.S.; BARTOLOMÉ, J.F.; MELLO-CASTANHO, S.
Although bioactive glasses have been widely used for the surfaces of orthopaedic and dental implants, its limited mechanical strength, low toughness and wear resistance have prevented their use as load-bearing devices. Considering that even a small variation in the composition of such materials can deeply modify their features, inducing very different physicochemical or mechanical properties, the present research was conducted by modifying the glass network of 45S5 Bioglass® by adding Al2O3 and SrO to obtain a highly bioactive glass with improved mechanical and tribological performance for biomedical applications. The addition of 2% Al2O3 and 2% SrO produced a dense material with the same elastic modulus as 45S5 (~50 GPa). Moreover, the bending strength increased by 60% and the toughness doubled. The wear rate obtained against steel was found to be three times lower than that of 45S5. From the results, it can be assumed that both alumina and strontium synergistically play crucial roles in the mechanical and tribological properties of these new bioactive glasses.
Structural and thermal behavior of 45S5 Bioglass®-based compositions containing alumina and strontium
2020 - ARAUJO, MARIANA S.; SILVA, ANTONIO C.; BARTOLOMÉ, JOSÉ F.; MELLO-CASTANHO, SONIA
The present research exposes the influence of 2 mol% of Al2O3 and 2 mol% SrO in 45S5 Bioglass®-based compositions. Four compositions were produced to elucidate the difference in how both oxides influence structure and thermal behavior separately and their synergy when together. Thermal properties, crystallization tendency, and sintering behavior was evaluated by differential scanning calorimetry, hot stage microscopy, and dilatometry. Changes of medium-range structures were characterized by Qn distribution of Raman spectroscopy and evaluation of 31P, 27Al, 23Na, and 29Si environment obtained by magic angle spinning nuclear magnetic resonance. Despite Qn distribution was predominantly Q2 in all samples, the composition criteria used enabled improved processing and stabilibity characteristics. The addition of Al2O3 and SrO promoted larger sinterability parameter (Sc) which indicates better sintering behavior, the glass stability against crystallization doubled (KH) compared to 45S5 and the processing window enlarged from 106 to 171.
Niobium modified glass for nuclear waste immobilization
2019 - SILVA, D.L.C. e; SILVA, A.C.; RAMBO, C.R.; CASTANHO, S.
The impact of Nb2O5 addition to glasses belonging to the system SiO2-Na2O-CaO-B2O5-Al2O3 were investigated for nuclear waste immobilization applications. The glass samples, produced by the traditional melting method, were characterized by XRD, Differential Thermal Analysis (DTA) and Fourier-Transform Infrared Spectroscopy (FT-IR). The XRD results confirmed the amorphous state of the glasses and the thermal and FT-IR analyses revealed that Nb2O5 was dispersedly incorporated to the glass structure and that higher contents of the oxide result in a niobate network growth. The glasses showed good resistance to devitrification and are applicable for nuclear waste vitrification processes. These results show that the process is a promising alternative to produce a new family of glasses with optimized thermal resistance for the immobilization of nuclear wastes.