ESPERIDIANA AUGUSTA BARRETOS DE MOURA

Resumo

Graduated in Chemical Engineering at Faculdade Oswaldo Cruz (1983), Master in Nuclear Technology - Applications at IPEN / USP (1999), Ph.D. in Nuclear Technology - Applications at IPEN / USP (2006) and Post-Doctorate at Center for Advanced Materials ( T-CAM) from Tuskegee University, AL, USA. The main lines of research are: Synthesis of metallic nanoparticles; Obtaining and characterization of nanoparticles from mineral activity and agroindustry residues; Micro and nanofiller functionalization; Synthesis and reduction of graphene oxide; Development and modification of composite materials based on conventional and biodegradable polymers with vegetable fibers, micro and nanofillers of renewable origin; Development of biodegradable, active and intelligent plastic packaging for food, cosmetics, medical and pharmaceutical products; Development of conductive polymeric materials; Development of biomaterials for application in the regeneration of bone and dental tissue. (Text obtained from the Currículo Lattes on October 8th 2021)


Possui graduação em Engenharia Química pela Faculdade Oswaldo Cruz (1983), mestrado em Tecnologia Nuclear ? Aplicações pelo IPEN/USP (1999), doutorado em Tecnologia Nuclear ? Aplicações pelo IPEN/USP (2006) e Pós-Doutorado no Center for Advanced Materials (T-CAM) da Tuskegee University, AL, USA. As principais linhas de pesquisa são: Síntese de nanopartículas metálicas; Obtenção e caracterização de nanopartículas a partir de resíduos da atividade mineral e da agroindústria; Funcionalização de micro e nanocargas; Síntese e redução de óxido de grafeno; Desenvolvimento e modificaçao de materiais compósitos baseados em polímeros convencionais e biodegradáveis com fibras vegetais, micro e nanocargas de origem renovável; Desenvolvimento de embalagens plásticas biodegradáveis, ativas e inteligentes para alimentos, cosméticos, produtos médicos e farmacêuticos;Desenvolvimento de materiais poliméricos condutores; Desenvolvimento de biomateriais para aplicação na regeneração de tecidos ósseos e dentários. (Texto extraído do Currículo Lattes em 08 out. 2021)

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 1 de 1
  • Artigo IPEN-doc 22627
    Preparation of EVOH/graphene oxide by blown film extrusion – correlation between film properties and graphene oxide addition
    2016 - BARREIRA, DAILI A.S.; SANTANA, JULYANA G.; LAZARO, LOURDES Y.; RUIZ, JESUS G.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
    This study reports the preparation of EVOH films reinforced with graphene oxide by twin-screw extrusion and blown film extrusion processing. The preparation of EVOH/Graphene oxide (EVOH/GO) films was carried out in two steps: EVOH with Graphene oxide powder (0-0.5 wt. %) was fed into a co-rotating twin-screw extruder, then the EVOH/GO nanocomposite was transformed into thin films using an extrusion blown film, single screw machine with 25 mm diameter and specimens test samples were obtained. The purpose of this study was to evaluate the correlation between mechanical properties and thermal stability of EVOH/GO films and the amount of graphene oxide added to the EVOH matrix. Tensile tests were conducted using an INSTRON Testing Machine. DSC and TG analysis were used for investigate the thermal stability of EVOH/Graphene oxide films. DSC analysis results showed that melting temperature (Tm), melting enthalpy (Hm) and consequently the degree of crystallinity (Xc) of neat EVOH increased with the incorporation of the 0.1 and 0.5 wt. % of GO. TG of the composites showed a great difference in weight loss and in the onset degradation temperature when compared with the neat EVOH. The more important change was observed for EVOH/GO with 0.2 wt. % GO content that presented an increase of the onset degradation temperature. A significant enhancement of the tensile strength at break of EVOH/GO flexible film without important effects on the elongation at break were also observed, except for EVOH/GO with 0.2 wt. % GO content that presented an important increase in both, tensile strength and elongation at break. It can be concluded that the addition of GO is an effective means to improve the EVOH flexible films properties and led to the obtaining of packaging materials with superior properties suitable for several industrial applications.