MARCELO FRANCIS MADUAR

(Fonte: Lattes)
ORCID
ScopusID
ResearcherID
Google Scholar
Resumo

Doctorate (2010) and Master (2000) degrees in Nuclear Technology at São Paulo University, Physics Bachelorate at São Paulo University (1996) and Technologist in Data Processing at Universidade Estadual Paulista Júlio de Mesquita Filho (1989). Experience in Experimental Physics, focusing on Experimental Methods and Instrumentation for Elementary Particles and Nuclear Physics. (Text obtained from the Currículo Lattes on November 16th 2021)


Doutorado (2010) e Mestrado (2000) em Tecnologia Nuclear pela Universidade de São Paulo, Bacharelado em Física pela Universidade de São Paulo (1996) e graduação em Tecnologia Em Processamento de Dados pela Universidade Estadual Paulista Júlio de Mesquita Filho (1989). Tecnologista senior do Instituto de Pesquisas Energéticas e Nucleres (IPEN), órgão da Comissão Nacional de Energia Nuclear (CNEN). Gerente adjunto (desde julho/2018) do Serviço de Gestão de Radiometria Ambiental (SEGRA) do IPEN. Tem experiência na área de Física, com ênfase em Métodos Experimentais e Instrumentação para Detectores de Radiação, atuando principalmente nos seguintes temas: espectrometria gama, radioatividade ambiental e aplicação de métodos computacionais na avaliação de espectros gama, em modelos de dispersão ambiental e em dose externa decorrente de radiação gama. Orientador de Mestrado do Programa de Pós-Graduação em Tecnologia Nuclear do IPEN - área de Aplicações (TNA) a partir de maio de 2019 e docente das disciplinas TNA5754, Radioatividade no meio ambiente e avaliação de impacto radiológico ambiental, e TNA5733, Tópicos Avançados de Medidas Nucleares. (Texto extraído do Currículo Lattes em 16 nov. 2021)

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Filtros

20162
Limpar filtros

Configurações

Tipo de acesso: closedAccess × Assunto: concentration ratio ×

Resultados de Busca

Agora exibindo 1 - 2 de 2
  • Imagem de Miniatura
    Artigo IPEN-doc 27080
    Radiochemical method for characterization of the filter cartridges from the IEA-R1 reactor
    2016 - GERALDO, BIANCA; VICENTE, ROBERTO; FERREIRA, ROBSON J.; MADUAR, MARCELO F.; GOES, MARCOS M.; MARUMO, JULIO T.
    The filter cartridges used in water purification system of the IEA-R1 research reactor become radioactive waste after the end of their useful life. The characterization of this waste is one step in their management, which aims at identifying and quantifying the radionuclides present, including those known as "difficult to measure" (DTM) radionuclides. Wastes from nuclear reactors contain fission and activation products and transuranic elements, only few of them emitting gamma radiation measurable by simple gamma spectrometry methods. In routine waste management activities, the concentrations of the DTM can only be estimated by indirect methods such as scaling factors. The method of the scaling factors uses empirically determined proportions between the concentrations of DTM radionuclides and that of easily measurable gamma emitters called key nuclides (KN), to calculate DTM concentrations. Determining the scaling factors for the filter cartridges is a hard task when the number of samples is large, not only because the preparation of samples is difficult but also because the number of radionuclides to analyze is large. If it can be demonstrated that DTM and KN are both distributed evenly in the filters, less samples from each filter are necessary, reducing lab work. The aim of this paper is to present the results of the assessment of homogeneity along the filter cartridges by gamma spectrometry of chemically reduced samples. Five thin slices of five filters were burnt and the ashes quantitatively dissolved and the activity concentration of the solutions determined by gamma spectrometry.
  • Imagem de Miniatura
    Artigo IPEN-doc 23539
    A dose calculation model application for indoor exposure to two-layer walls gamma irradiation: the case study of ceramic tiles
    2016 - RIGHI, SERENA; VERITA, SIMONA; ROSSI, PIER L.; MADUAR, MARCELO F.
    A calculation model for determining the indoor dose due to building materials with significant concentration of radioactivity has been applied to the case study of ceramic tiles; the model allows the contribution of bearing walls and wall covering materials to be calculated. The model is implemented in FORTRAN 77 and provides a quantification of the gamma radiation field (in terms of external dose rate in air, nGyh21) inside a room with known dimensions. Application model results have been validated both by comparison with the results obtained by other authors and by experimental measurements. Model sensitivity and performances have been analysed and lastly the case studies focused on ceramic tiles have been proposed.