JOSE ANTONIO BATISTA DE SOUZA
3 resultados
Resultados de Busca
Agora exibindo 1 - 3 de 3
Artigo IPEN-doc 27390 Effects of Picture Frame Technique (PFT) on the corrosion behavior of 6061 aluminum alloy2020 - MILAGRE, MARIANA X.; DONATUS, UYIME; MOGILI, NAGA V.; MACHADO, CARULINE S.C.; ARAUJO, JOAO V.S.; KLUMPP, RAFAEL E.; FERNANDES, STELA M.C.; SOUZA, JOSE A.B. de; COSTA, ISOLDAThe 6061 Al–Mg–Si alloy is used in nuclear fuel plates of nuclear research reactors which are fed with fuel in plate shapes. The production of these plates is based on the picture frame technique (PFT). The picture frame technique (PFT) is a manufacturing process for the fabrication of nuclear fuel plates where the nuclear fuel is encapsulated by Al alloy plates and thermomechanically processed to generate a set with reduced thickness. The effects of PFT on the corrosion resistance of the 6061 aluminum alloy were evaluated in this study by immersion and electrochemical tests in 0.005 mol L−1 NaCl solution. The results showed that the PFT fabrication process increases the corrosion resistance of the 6061 alloy in relation to the conventional 6061-T6, due phase dissolution and lower content of β’’ phase. Also, corrosion propagation gradually changes, with an increasing number of processing steps, from intergranular to intragranular corrosion attack.Artigo IPEN-doc 26995 Coatings for safe long term wet storage of spent Al-clad research reactor fuels2015 - RAMANATHAN, L.V.; FERNANDES, S.M.C.; CORREA, O.V.; SOUZA, J.A. de; ANTUNES, R.A.; OLIVEIRA, M.C.L. dePitting corrosion of the aluminium cladding of spent research reactor (RR) fuels in wet storage has been observed and the use of conversion coatings to protect the cladding was proposed. A coating prepared by conventional chemical processing as opposed to electrochemical processing is the only option due to constraints related to the shape of the fuel and its high radioactivity. Hence, hydrotalcite (HTC) and boehmite were considered. This paper presents: (a) preparation of hydrotalcite (HTC) coatings from different baths followed by post-coating treatments; (b) corrosion behavior of HTC coated AA 6061 alloy; (c) results of field studies in which uncoated and HTC coated AA 6061 alloy coupons and plates, the latter assembled as a dummy fuel element, were exposed to the IEA-R1 reactor spent fuel basin for extended periods. The laboratory and field tests revealed marked improvements in the corrosion resistance of HTC coated specimens, coupons and plates. The mechanism of corrosion protection is presented.Artigo IPEN-doc 21711 Effect of processing on microstructure and corrosion mitigating properties of hydrotalcite coatings on AA 6061 alloy2015 - FERNANDES, STELA M. de C.; CORREA, OLANDIR V.; SOUZA, JOSE A.B. de; ANTUNES, RENATO A.; LIMA, NELSON B. de; RAMANATHAN, LALGUDI V.