SOLANGE KAZUMI SAKATA
Resumo
Possui graduação em Química bacharelado e licenciatura pela Universidade de São Paulo. Doutorado na área de Química Orgânica, com ênfase em Eletrossintese Orgânica pelo Instituto de Química da Universidade de São Paulo. Pós - doutorados em Biotecnologia no Scripps Institution of Oceanography na University of California - San Diego -USA) e no Instituto de Química da Universidade de São Paulo. Foi pesquisadora visitante no Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB-Stuttgart - Alemanha no estudo do metagenoma na produção de enzimas para fins catalíticos e no Centro Tecnológico da Marinha de São Paulo (CTM-SP) no desenvolvimento e caracterização de polímeros. Atualmente é pesquisadora do Instituto de Pesquisas Energéticas e Nucleares (IPEN- SP / CNEN) no Centro de Tecnologia das Radiações e estuda o efeitos das radiações em nano materiais de carbono. (Texto extraído do Currículo Lattes em 27 dez. 2021).
Projetos de Pesquisa
Unidades Organizacionais
Cargo
Resultados de Busca
Artigo IPEN-doc 26529 X-ray diffraction evaluation of the average number of layers in thermal reduced graphene powder for supercapacitor nanomaterial2019 - CARDOSO, QUEZIA de A.; CASINI, JULIO C.S.; BARBOSA, LUZINETE P.; SERNA, MARILENE M.; GALEGO, EGUIBERTO; SOBRINHO, LUIZA F.; SAKATA, SOLANGE K.; FARIA JUNIOR, RUBENS N. deGraphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups and recovering the conjugated structure. In this work, the thermal reduction of GO powder has been carried out using back pumping vacuum pressures and investigated employing X-ray diffraction analysis. The experimental results of estimating the number of graphene layers on the reduced powder at various temperatures (200 – 1000 °C) have been reported. Electrical changes have been produced in a graphene oxide with the vacuum reduction process. This study has shown that the ideal processing temperature for reducing graphene oxide nanomaterial was about 400 oC. It has also been shown that at 600 oC the number of layers in the reduced nanomaterial increased. The internal series equivalent resistance (ESR) has been improved substantially with the vacuum thermal treatment even at temperatures above 400 oC. ESR was reduced from 95.0 to about 13.8 Ω cm2 with this processing. These results showed that the process can be applied to the reduction of graphene oxide to produce supercapacitor nanomaterials. The advantage of employing this method is that the processing is a straightforward and low cost thermal treatment that might be used for large amount of nanocomposite material.Artigo IPEN-doc 25074 The production of reduced graphene oxide by a low-cost vacuum system for supercapacitor applications2018 - CARDOSO, QUEZIA; SILVA, FRANKS M.; VIEIRA, LIGIA S.; CASINI, JULIO C.S.; SAKATA, SOLANGE K.; FARIA, RUBENS N. deGraphene has attracted significant interest because of its excellent electrical properties. However, a practical method for producing graphene on a large scale is yet to be developed. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygencontaining groups and recovering the conjugated structure. GO can be produced using inexpensive graphite as the raw material via cost-effective chemical methods. High vacuum and temperature (10−7 mbar and 1100°C, respectively) conditions are well-known to enable the preparation of reduced powder at the laboratory scale. However, a large-scale high vacuum reduction system that can be routinely operated at 10−7 mbar requires considerable initial capital as well as substantial operational and maintenance costs. The current study aims at developing an inexpensive method for the large-scale reduction of graphene oxide. A stainless steel vessel was evacuated to backing-pump pressure (10−2 mbar) and used to process GO at a range of temperatures. The reduction of GO powder at low vacuum pressures was attempted and investigated by X-ray diffraction and Fourier transform infrared spectroscopy. The experimental results of processing GO powder at various temperatures (200–1000°C) at relatively low pressures are reported. The microstructures of the processed materials were investigated using scanning electron microscopy and chemical microanalyses via energy dispersive X-ray analysis.Artigo IPEN-doc 23039 Supercapacitor application of powder prepared using the Hydrogenation Disproportionation Desorption and Recombination (HDDR) process in graphene oxide2017 - CASINI, JULIO C.S.; FERNANDEZ, ANTONIO P.R.; OLIVEIRA, RENE R. de; SAKATA, SOLANGE K.; FARIA JUNIOR, RUBENS N.Graphene (G) has been attracted great interest for its excellent electrical properties. However, the large-scale production of graphene is presently unfeasible. Graphene oxide (GO) can be (partly) reduced to graphene-like sheets by removing the oxygen-containing groups with the recovery of a conjugated structure. It can be produced using inexpensive graphite as raw material by cost-effective chemical methods. Although hydrogen (mixed with argon) at high temperature (1100°C) has been employed to reduce GO powder, the hydrogenation disproportionation desorption and recombination (HDDR) process in particular was unreported for this purpose. In the present work, attempts of reducing GO powder using the HDDR process have been carried out and investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). The experimental results of processing graphene oxide powder using unmixed hydrogen at moderate temperatures (about 850°C) and relatively low pressures (<2 bars) have been reported.Artigo IPEN-doc 23590 The production of reduced graphene oxide by a low-cost vacuum system for supercapacitors applications2016 - CARDOSO, Q.A.; SILVA, F.M.; VIEIRA, L.S.; CASINI, J.C.S.; SAKATA, S.K.; FARIA, R.N.Graphene (G) has attracted great interest for its excellent electrical properties. However, the large-scale production of graphene is still currently under investigations. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups with the recovery of a conjugated structure. It can be produced using inexpensive graphite as raw material by cost-effective chemical methods. High vacuum and temperature (10-7mbar/1100oC) is well established as an effective route for reduced powder preparation on a laboratory scale. However, a high vacuum reduction system, which can be routinely operated at 10-7 mbar, has a considerable capital, operational and maintenance cost to be used in a large scale. In the present work, a low-cost route aiming large scale reduction of graphene oxide has been investigated. A stainless steel vessel has been evacuated to backing-pump pressure (10-2 mbar) to process graphene oxide at low and high temperatures. Attempts of reducing GO powder using low vacuum pressures have been carried out and investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The experimental results of processing graphene oxide powder at various temperatures (200-1000°C) at relatively low pressures have been reported. The microstructures of the processed material have been investigated using scanning electron microscopy (SEM) and chemical microanalyses employing energy dispersive X-ray analysis (EDX).Artigo IPEN-doc 21788 Supercapacitor application of powder prepared using the hydrogenation disproportionation desorption and recombination (HDDR) process in graphene oxide2015 - CASINI, JULIO C.S.; FERNANDEZ, ANTONIO P.R.; OLIVEIRA, RENE R. de; SAKATA, SOLANGE K.; FARIA JUNIOR, RUBENS N.