A homemade electrochemical hanging droplet cell to evaluate the corrosion resistance of friction stir weld zones of the AA2198-T8 Al-Cu-Li alloy
Carregando...
Data
Data de publicação
2021
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL CORROSION CONGRESS, 21st; INTERNATIONAL CORROSION MEETING, 8th
Exportar
Resumo
In this study, the corrosion resistance of the different zones of the AA2198-T8 alloy welded using friction stir welding (FSW) was investigated by immersion and electrochemical tests during exposure to 0.005 mol L-1 NaCl solution. After immersion tests, the welding zones were classified in two groups, according to their severe localized corrosion (SLC) morphology. Zones exposed to higher temperatures during welding presented intergranular attack, whereas those exposed to lower temperatures presented intragranular attack. Electrochemical measurements performed employing a homemade hanging droplet cell revealed potential galvanic coupling between the two groups. The base metal (BM) presented the most anodic potentials. The open circuit potential (OCP) increased from BM towards the stir zone (SZ). The results obtained by the hanging droplet cell were reproducible and coherent with the classification of the zones in the two proposed groups. The homemade electrochemical hanging droplet cell proved a very reliable tool to investigate the electrochemical behavior of the FSWed zones in Al-Cu-Li alloys.
Como referenciar
MACHADO, CARULINE de S.C.; HERNANDEZ, JOSE W.C.; MILAGRE, MARIANA X.; ARAUJO, JOAO V. de S.; DONATUS, UYIME; COSTA, ISOLDA. A homemade electrochemical hanging droplet cell to evaluate the corrosion resistance of friction stir weld zones of the AA2198-T8 Al-Cu-Li alloy. In: INTERNATIONAL CORROSION CONGRESS, 21st; INTERNATIONAL CORROSION MEETING, 8th, July 20-23, 2021, Online. Anais... Rio de Janeiro, RJ: Associação Brasileira de Corrosão - ABRACO, 2021. Disponível em: http://repositorio.ipen.br/handle/123456789/33237. Acesso em: 30 Dec 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.