Status of the development of a fuel assembly decay heat calorimeter for the IEA-R1 nuclear research reactor

Abstract

The heat release due to decay of fission products following a nuclear reactor shutdown is important matter for determining cooling requirements as well as for predicting postulated accident consequences. Accurate evaluation of decay heat can also potentially provide independent data for the cross examination of fuel burnup calculations, which is useful where few resources are available for examination of spent fuel. The evaluation of decay heat from unloaded fuel assemblies of the IEA R1 research reactor was proposed in order to seize that opportunity. With that purpose a special measuring device is under development at the Nuclear and Energy Research Institute (IPEN). Since average heat flux as low as 0.1W/cm2 is expected and since decay heat release must be accurately evaluated, the device design had to overcome the difficulties of measuring small amounts of heat released over a large boundary surface. The design had also to ensure the safe cooling of the fuel assemblies and proper radiological protection for the personnel. In view of the tight constraints, a novel design was adopted. The device features a submersible measurement chamber, which allows all measurement procedures to be performed without removing the fuel assemblies from the reactor pool, and an array of semiconductor thermoelectric modules, which provides highly accurate decay power measurements. The assemblage of the device is currently in progress, the main parts have already been acquired or manufactured and key components passed partial tests. Commissioning and main experiments will be performed up to the end of 2019.