Effect of ionizing radiation on carbon nanotube yarn

Carregando...
Imagem de Miniatura

Data

Data de publicação

2016

Orientador

Título da Revista

ISSN da Revista

Título do Volume

É parte de

É parte de

É parte de

É parte de

CONGRESSO BRASILEIRO DE ENGENHARIA E CIENCIA DOS MATERIAIS, 22.
Exportar
Mendeley

Projetos de Pesquisa

Unidades Organizacionais

Fascículo

Resumo
Individual carbon nanotubes (CNTs) exhibit excellent mechanical, electrical and thermal properties, leading to development of a new generation of advanced lightweight materials and spacecraft electronics substituting the electronics based on silicon. Carbon nanotube yarn is developed to overcome the dispersion issues of pristine CNTs into liquids which is a limitation to combine with other materials. The direct assembly of CNTs into macroscopic fibers or sheets has been a way to overcome the dispersion process challenge. In this study, for a wide range of application of this material, we investigate effectively the defects on CNT yarns structure created by electron beam and gamma used as a source of ionizing radiation. The CNT yarns were irradiated at doses between 100 and 800 kGys and the effect of this irradiation on morphology and mechanical properties also were investigated completely. As a result, the resulting samples irradiated with electron beam at doses of 400, 600 and 800 kGy had a decrease in the strength from 251.09 ± 26.52 MPa for pristine to 108.86 ± 23.77, 153.15 ± 21.63, 170.50 ± 25.78 MPa respectively. The sample irradiated with gamma at dose of 100 kGy had no increase in the strength compared with pristine sample but had an increase in the elasticity modulus from 8.79 ± 1.19 to 19.63 ± 2.02 GPa, respectively. The quality of the CNT yarns that was gamma irradiated with absorbed dose of 100 kGy remains the same with improvement of 123% on the Young’s modulus.

Como referenciar
EVORA, M.C.; HIREMATH, N.; LU, X.; KANG, N.; SILVA, L.A. E; BHAT, G.; MAYS, J. Effect of ionizing radiation on carbon nanotube yarn. In: CONGRESSO BRASILEIRO DE ENGENHARIA E CIENCIA DOS MATERIAIS, 22., 06-10 de novembro, 2016, Natal, RN. Abstract... p. 4032. Disponível em: http://repositorio.ipen.br/handle/123456789/27269. Acesso em: 30 Dec 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.

Agência de fomento