Evaluation of the influence of different deposition techniques on the formation of transparent conductive silver nanowire films
Carregando...
Data
Data de publicação
2024
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
REUNIAO ANUAL DA SBQ, 47.
Exportar
Resumo
Transparent conductive films (TCFs) are components of optoelectronic devices, characterized by high transparency
and conductivity, being used in various applications, such as displays, solar cells, etc. The most used material in TCFs
is ITO (indium tin oxide), with transmittance greater than 90% and low sheet resistance, but it is expensive, its
production is harmful to the environment, and, in addition, it is a rigid and fragile, that is, it cannot be used on flexible
screens. For the new generation of TCFs, the use of nanomaterials, such as silver nanowires, has been gaining
prominence due to their characteristics of flexibility, high conductivity and mechanical resistance, therefore, they can
be used in flexible screens [1]. In transparent conductive silver nanowires films production, different deposition
techniques can be used, such as dip-coating, drop-casting and spray-casting, which consist of immersing the substrate
in a dispersion containing the conductive material, dropping the material dispersed and spraying the dispersion onto
the substrate, respectively [2]. Therefore, in this work TCFs containing silver nanowires on flexible substrate using
different deposition techniques were produced, aiming to obtain total coverage, greater homogeneity and high
transmittance of the films. Afterwards, the films were evaluated and characterized by SEM, UV-VIS and XRD. In the
XRD analysis, it was possible to observe reflections referring to the planes (111) and (200) characteristic of Ag-FCC.
In the SEM and UV-VIS analyses, it was possible to verify that the films produced with the drop-casting technique
showed a greater amount of deposited material, however, with lower transmittance, reaching 83% transmittance at
550 nm for 1 deposited layer. However, the dip-coating and spray-casting techniques were the most homogeneous
and presented the highest transmittance, with respectively 92% and 90% at 550nm. According to the results obtained,
the techniques that most favor homogeneity and transmittance are dip-coating and spray-casting.
Como referenciar
SARAIVA, STEFANY R.; SILVA, BARBARA P.G.; SILVA, CRYSTIAN W.C. da; OTUBO, LARISSA. Evaluation of the influence of different deposition techniques on the formation of transparent conductive silver nanowire films. In: REUNIAO ANUAL DA SBQ, 47., 22-25 de maio, 2024, Águas de Lindóia, SP. Resumo... São Carlos, SP: Aptor Software, 2024. p. 474-474. Disponível em: https://repositorio.ipen.br/handle/123456789/49115. Acesso em: 20 Mar 2026.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.