Influence of reinforcing efficiency of clay on the mechanical properties of poly(butylene terephthalate) nanocomposite
Carregando...
Data
Data de publicação
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Ceramics
Exportar
Resumo
In contrast to traditional fillers, clay, in particular, natural smectite clay, represents an environmentally significant alternative to improve the properties of polymers. Compared to conventional
nanofillers, smectite clay can effectively enhance the physical and mechanical properties of polymer
nanocomposites with a relatively small amount of addition (<5 wt%). The present study focuses
on investigating the reinforcing efficiency of different amounts (up to 5 wt%) of a natural Brazilian
smectite clay modified (MBClay) on the mechanical properties of poly(butylene terephthalate) (PBT)
nanocomposites and also evaluates the correlation between MBClay addition and the mechanical
and thermal behaviors of the PBT/MBClay nanocomposites. Natural Brazilian clay modified by
the addition of quaternary salt and sodium carbonate (MBClay) was infused into the PBT polymer
by melt extrusion using a twin-screw extruder. It was found that the best properties for PBT were
obtained at 3.7 wt% of modified BClay. Tensile strength at break exhibited increased by about 60%,
flexural strength increased by 24%, and flexural modulus increased by 17%. In addition, an increase in
the crystallinity percentage of PBT/BClay nanocomposite was confirmed by DSC and XRD analysis,
and a gain of about 45% in HDT was successfully achieved due to the incorporation of 3.7 wt%
of MBClay
Como referenciar
COLOMBO, MARIA A.S.; DIAZ, FRANCISCO R.V.; KODALI, DEEPA; RANGARI, VIJAYA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B. Influence of reinforcing efficiency of clay on the mechanical properties of poly(butylene terephthalate) nanocomposite. Ceramics, v. 6, n. 1, p. 58-73, 2023. DOI: 10.3390/ceramics6010005. Disponível em: http://repositorio.ipen.br/handle/123456789/34074. Acesso em: 24 Mar 2026.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.