Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization
Carregando...
Data
Data de publicação
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Journal of Materials Processing Technology
Exportar
Resumo
Medium carbon steels are mostly used for simple applications; however, new applications have been developed for which good sheet metal formability is required. These types of steels have an inherent low formability. A medium-carbon hot-rolled SAE 1050 steel was selected for this study. It has been cold rolled with thickness reductions varying between 7 and 80%. The samples obtained were used to evaluate the strain hardening curve. For samples with a 50 and 80% thickness reduction, an annealing heat treatment was performed to achieve recrystallization. The material was characterized in the "as-received", cold rolled and annealed conditions using several methods: optical metallography, X-ray diffraction (texture), Vickers hardness, and tensile testing. For large thickness reductions, the SAE 1050 steel presented low elongation, less than 2%, and yield strength (YS) and tensile strength (TS) around 1400 MPa. Texture in the "as-received" condition showed strong components on the {0 0 1} plane, in the 〈1 0 0〉, 〈2 1 0〉 and 〈 1 over(1, ̄) 0 〉 directions. After cold rolling, the texture did not present any significant changes for small thickness reductions, however. It changed completely for large ones, where gamma, 〈1 1 1〉//ND, alpha, 〈1 1 0〉//RD, and gamma prime, 〈2 2 3〉//ND, fibres were strengthened. After annealing, the microstructure of the SAE 1050 steel was characterized by recrystallized ferrite and globular cementite. There was little change in the alpha fibre for the 50% reduction, whereas for the 80% reduction, its intensity increased. Both gamma and gamma prime fibres vanished upon annealing for 50 and 80% reductions alike.
Como referenciar
HERRERA, C.; LIMA, N.B.; FERREIRA FILHO, A.; PLAUT, R.L.; PADILHA, A.F. Texture and mechanical properties evolution of a deep drawing medium carbon steel during cold rolling and subsequent recrystallization. Journal of Materials Processing Technology, v. 209, n. 7, p. 3518-3524, 2009. DOI: 10.1016/j.jmatprotec.2008.08.007. Disponível em: http://repositorio.ipen.br/handle/123456789/4781. Acesso em: 30 Dec 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.