SOL-GEL α-Al2O3 samples
Carregando...
Data
Data de publicação
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Journal of Applied Physics
Exportar
Resumo
The analysis of the thermoluminiscence (TL) kinetics parameters of SOL-GEL α-Al2O3 with several different concentrations of impurities
prepared through the solgel process is reported. A TL glow curve measured at 0.2 K/s after beta irradiation to 0.5 Gy revealed one peak at
approximately 447 K. TL spectra were acquired and showed luminescent emission bands around 420 nm and 750 nm. The activation energies,
the frequency factors, and the kinetic order involved in the TL emission were evaluated using the maximum peak temperature
response, the peak shape of the TL glow curve, the TL glow curve area, and the glow curve fitting methods. The order of kinetics of the
peak was evaluated as first order using TM dependence on the radiation dose. The (TM–Tstop) technique was used for determining the
number of peaks in the glow curve. The activation energies obtained are in agreement with all the applied methods. The activation energy
calculated by various methods varied from 0.885 ± 0.008 eV to 1.05 ± 0.10 eV. The frequency factor determined by all methods was of the
order of 109 s−1. The dosimetric peak is affected by thermal quenching. The following thermal quenching parameters were estimated: the
activation energy of the thermal quenching W= 1.05 ± 0.15 eV and the constant C = 8.27 × 1010 s−1. The trapping parameters of SOL-GEL
α-Al2O3 detectors are reported in the present work for the first time.
Como referenciar
POLO, IVON O.; JUNOT, DANILO O.; CALDAS, LINDA V.E. SOL-GEL α-Al2O3 samples: analysis of the TL kinetics. Journal of Applied Physics, v. 125, n. 18, p. 185102-1 - 185102-14, 2019. DOI: 10.1063/1.5088139. Disponível em: http://repositorio.ipen.br/handle/123456789/30031. Acesso em: 30 Dec 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.