Characterization of a 3D prototyping semi-automated filter holder system for RQR radiation qualities

Abstract

Characterizing radiation measurement systems, such as diagnostic radiology systems for RQR and RQA, is essential for ensuring reliable results in standardized instrument calibration laboratories. Quality control of dosimetry devices, such as patient dose calibrators (PDCs), a reference meter, is crucial for ensuring accurate measurements. This study demonstrates the use of spectrometry and ionization chambers to characterize a set of semi-automated 3D prototyping filter holder systems, developed in a previously project, designed for applications such as Kerma-Area Product (KAP) meter calibration. The set of 3D prototypes were adjusted to a filter wheel and characterized using an X-ray spectrometer, followed by an ionization chamber, according to international standards. The characterization of radiation qualities from 50 to 150 kV in diagnostic radiology was performed using the substitution method: first with an ionization chamber, then with a PDC. The PDC was calibrated for KAP and Air Kerma quantities, considering the conditions of the X-ray system and factors such as temperature, humidity, and pressure. Spectrometric analysis and the use of an ionization chamber were effective in determining these parameters. Spectral characterization allowed for accurate measurements to establish proper quality control, then it is possible to use the PDC calibrated for calibration procedures for KAP meters. Future studies intend to compare these results with computational simulations using the TOPAS Monte Carlo code to validate the calibration method.