Evaluation of 3YTZP films deposited by electrophoretic deposition on titanium and irradiated with Nd:YAG laser
Carregando...
Data
Data de publicação:
2018
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
É parte de
INTERNATIONAL CONGRESS ON CERAMICS, 7th; CONGRESSO BRASILEIRO DE CERÂMICA, 62.
Exportar
Resumo
Titanium is widely used in chemical, power generation, aerospace and biomedical
industries because of its good mechanical properties, corrosion resistance and good
biocompatibility. However, when is used, for example, in steam turbines is necessary
increase the corrosion resistance at high temperature, or when is used in dentistry,
when the metallic gray color compromise the aesthetics rehab, it becomes interesting
to coat the titanium with a ceramic layers, and 3YTZP (Yttria-stabilized tetragonal
zirconia) is suitable for this application, because it has good mechanical properties,
good resistance to thermal cycles and good biocompatibility. The electrophoretic
deposition is a suitable technique to obtain theses coatings. After deposition, is
necessary achieve out the sintering of coating, but the sintering temperature of zirconia
is about 1500 °C, and submit metal/ceramic joint to this temperature, cam bring on the
degradation of metal. The solution to these problems is performing the sintering using
a laser radiation. In this work it was studied the laser irradiation of zirconia ceramic
coating deposited on titanium by electrophoretic deposition. Three series of irradiation
tests were carried out using Nd:YAG (wavelength 1.06 μm) pulsed laser, energy of 0.5
J, pulse duration of 10 ms and rate of 10 Hz. During the tests, it was studied the
influence of fluency, scanning speed and repetition of laser incidence. The repetition
covered a range of 1 to 27 times. Prepared samples were characterized by optical and
scanning electron microscopy, X-ray diffraction and scratch microindentation. The Xray
results showed presence of tetragonal and monoclinic phases in the irradiated
coatings. The optical and SEM results showed that densification increases with the
increasing of number of laser incidence repetition and the scratch results showed that
the irradiated samples presented more scratch resistance than non-irradiated samples.
Como referenciar
XAVIER, G.L.; USSUI, V.; OLIVEIRA, R.R.; ROSSI, W. de; LIMA, N.B.; CASTRO, M.C.B. de. Evaluation of 3YTZP films deposited by electrophoretic deposition on titanium and irradiated with Nd:YAG laser. In: INTERNATIONAL CONGRESS ON CERAMICS, 7th; CONGRESSO BRASILEIRO DE CERÂMICA, 62., June 17-21, 2018, Foz do Iguaçu, PR. Abstract... p. 922-922. Disponível em: http://repositorio.ipen.br/handle/123456789/29706. Acesso em: 12 Mar 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.