Microstructure and electrical conductivity of fast fired Sr- and Mg-doped lanthanum gallate
Carregando...
Data
Data de publicação
Autores IPEN
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Ceramics International
ODS
Exportar
Resumo
La0.9Sr0.1Ga0.8Mg0.2O3−δ solid electrolytes were consolidated by fast firing aiming to investigate the effects of the sintering method on densification, microstructure and ionic conductivity. Powder mixtures were prepared by solid state reaction at 1250 and 1350 °C for 12 h, and fast fired at 1450 and 1500 °C temperatures for 5 and 10 min. The content of impurity phases was found to be quite low with this sintering method. Relatively high density (>90% of the theoretical value) and low porosity (<1.5%) were readily obtained for powder mixtures calcined at 1250 °C. The activation energy for conduction was approximately 1 eV. Specimens fast fired at 1450 °C for 10 min with a mean grain size of 2.26 µm reached the highest value of total ionic conductivity, 22 mS cm−1, at 600 °C.
Como referenciar
REIS, S.L.; MUCCILLO, E.N.S. Microstructure and electrical conductivity of fast fired Sr- and Mg-doped lanthanum gallate. Ceramics International, v. 42, n. 6, p. 7270-7277, 2016. DOI: 10.1016/j.ceramint.2016.01.121. Disponível em: http://repositorio.ipen.br/handle/123456789/25755. Acesso em: 30 Dec 2025.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.