SUMAIR GOUVEIA DE ARAUJO

Resumo

Graduated in Electrical Engineering - FPTE (1980), Master´s degree in Nuclear Technology Area - USP (1996) and PhD in Nuclear Technology Area - USP (2001), has been working since 1982 as a Senior Technologist at the National Nuclear Energy Commission (IPEN-CNEN / SP). Has experience in Nuclear Engineering, acting on the following subjects: cyclotron, irradiation systems, radioisotope production, high-power microwaves, material recycling, heavy oil recovery, high pressure and high temperature process control, hydrotreating and hydrodesulfurization processes for hydrocarbon loads, microwave and continuous high pressure and high temperature batch reactor units. Worked as a project coordinator for IPEN-CNEN / SP, in partnership with CENPES / Petrobras, from 2005 to 2018, through Future Refining Projects, for the development of pioneering studies, in the application of unconventional technologies, such as microwaves, in order to improve the quality of Brazilian oils. Awards: Inventor Award 2007 (Petrobras); Inventor Award 2008 (Petrobras); Winner of the 1st IPEN Technological Innovation Award 2014; Finalist in Category III of the ANP 2019 Technological Innovation Award. (Text obtained from the Currículo Lattes on November 29th 2021)


Possui graduação em Engenharia Elétrica pela Fundação Paulista de Tecnologia e Educação (1980), mestrado em Tecnologia Nuclear pelo Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP)/Universidade de São Paulo (1996) e doutorado em Área de Tecnologia Nuclear pelo Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP)/Universidade de São Paulo (2001). Atualmente é Tecnologista Senior da Comissão Nacional de Energia Nuclear (IPEN-CNEN/SP). Tem experiência na área de Engenharia Nuclear, com ênfase em Engenharia Nuclear, atuando principalmente nos seguintes temas: cíclotron, sistemas de irradiação, produção de radioisótopos, micro-ondas de alta potência, reciclagem de materiais, valorização de petróleo pesado, controle de processos em alta pressão e alta temperatura, processos de hidrotratamento e hidrodessulfurização de cargas de hidrocarbonetos, reatores de alta pressão e alta temperatura assistido por micro-ondas, sistemas reacionais de batelada e contínuo assistidos por micro-ondas. Atuou como coordenadora de projetos pelo IPEN-CNEN/SP, em parcerias com o CENPES/Petrobras, de 2005 a 2018, por meio de Projetos de Refino do Futuro, para desenvolvimento de estudos pioneiros, na aplicação de tecnologias não convencionais, como as micro-ondas, no melhoramento da qualidade dos óleos brasileiros. Premio Inventor 2007 (Petrobras); Premio Inventor 2008 (Petrobras); Vencedora do 1ºPrêmio IPEN de Inovação Tecnológica 2014, Finalista na Categoria III do Prêmio ANP de Inovação Tecnológica 2019. (Texto extraído do Currículo Lattes em 29 nov. 2021)

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 10 de 44
  • Resumo IPEN-doc 29970
    Apoio no processamento de cargas de agro-resíduos com micro-ondas, para a síntese de óxido de grafeno reduzido
    2023 - CARDOSO, ISADORA de A.; ARAUJO, SUMAIR G. de; LANDINI, LILIANE
  • Resumo IPEN-doc 21612
    Automated irradiation systems for use in cyclotrons
    2001 - ARAUJO, S.G.; SCIANI, V.
    The objective of this work was the development of irradiating systems completely automatized, always aiming to reduce the radiation exposition dose to the workers and to increase the reliability of use of these systems, because very high activities are expected in these processes.
  • Artigo IPEN-doc 27414
    Study of the feasibility of biodiesel production, from vegetable oils and catalysts of seafood residues, in a batch hydrogenation reaction unit, assisted by microwave and conventional heating
    2020 - ARAUJO, S.G.; LANDINI, L.; SALVADOR, V.L.R.; SCAPIN, M.A.; MASSANARES, B.F.; URBANINHO, A.B.
    In this work, it was proposed to study the feasibility of biodiesel production, from residues of vegetable oils used in domestic activities, employing (CaCO3) shells prepared like calcium oxide (CaO) as catalysts, in a batch reaction unit, on bench scale, installed at IPENCNEN/ SP. This unit is capable of operating with high pressure hydrogen gas (up to 200bar) and high temperature (up to 500°C, using microwave - MW (2.450MHz, with up to 2kW continuous and 8kW pulsed) and conventional heating – (electric) MC. In the tests, the oil load (mL), type and mass of catalyst, with or without hydrogen gas pressure (bar), temperature (°C), reaction time (h), microwave power (W), the speed of the load (rpm) agitation and the conventional heating were evaluated. The analytical determinations of the samples were carried out by means of density, gas chromatography (GC) and X-ray fluorescence. Data were collected in order to be compared with other methodologies, already used in the literature. The purpose of this work was to analyze the efficiency of the use of these types of catalysts and oils in the production of biodiesel, as an alternative technology. The Ca and CaO contents found in the pink shell, before and after the calcination, were 36.2% and 98.8%, respectively. The best result obtained for the density was 0.875182g/cm3, for the test with 4g of calcined shell catalyst and reaction of 1h. As to the methyl ester content, the highest result was 95.33%, in a test with 4g of catalyst and reaction of 3h. In the non-calcined shell test (22.5g), although the amount of mass used was much larger (5% of the oil mass), the ester content was very low, 2.11%.
  • Resumo IPEN-doc 26818
    Resíduos de frutos do mar
    2019 - ARAUJO, S.G.; LANDINI, L.; ZEFERINO, G.R.; SALVADOR, V.; SCAPIN, M.A.
    Resíduos de frutos do mar: oportunidades potenciais para produção de materiais bioativos Resíduos de frutos do mar são fontes ricas em diversos compostos e materiais bioativos e anualmente, no mundo, milhões de toneladas destes resíduos (conchas, ostras, camarões, caranguejos, lagostas, mariscos, etc) são produzidos. No Brasil, cerca de 2 milhões de toneladas somente no Litoral Sul/SP. Com este problema ambiental, há grande geração de resíduos sólidos de atividades pesqueiras e/ou de maricultura,frequentemente despejados em terrenos baldios, aterros sanitários ou no mar. No entanto, eles embutem grande quantidade de elementos/compostos químicos valiosos (cálcio, quintina, pigmentos, proteínas), e poderiam ser usados para diversas aplicações na medicina, industrias farmacêuticas, alimentícias, energéticas, etc., Estes resíduos normalmente têm seus valores potenciais ignorados e o seu aproveitamento diminuiria a agressão ambiental e geraria renda aos maricultores e pescadores Neste trabalho, resíduos de frutos do mar foram calcinados para converter CaCO3 em CaO, sendo um dos catalisadores sólidos heterogêneos, altamente ativo, mais utilizados em reação de transesterificação de óleos vegetais para produção do biodiesel. Eles foram calcinados a 1000°C e usados em pó (100 a 200mesh). A caracterização antes e após calcinação foi por WDXRF (FRX por dispersão de comprimento de onda),. O teor de Ca era de 36,2% e de 98,8% de CaO, respectivamente. As propriedades catalíticas foram verificadas em testes de produção de biodiesel, em uma unidade reacional com micro-ondas do IPEN. O maior teor de éster metílico, em GC, obtido foi de 98%, em um teste de 11g de catalisador (P-300W; t-1h; T-65°C; 600rpm). As densidades ficaram dentro das especificações (850 a 900kg/m3) - 20°C. Com estes estudos, verificou-se que é possível aproveitar diversos tipos de materiais, empregando metodologias alternativas e mais conscientes, para proteção do meio ambiente.
  • Artigo IPEN-doc 26287
    Preliminary assessment of the content of rare earth elements, uranium and thorium in tantalite after processing with microwave
    2019 - ARAUJO, SUMAIR G.; LANDINI, LILIANE; ZEFERINO, GABRIEL R.; SALVADOR, VERA L.R.; SCAPIN, MARCOS A.
    The microwave application of (MW) was studied with the aim of verifying the potentiality in the processing of tantalite containing compounds of rare earth elements (REEs), uranium and thorium (radioactivity level was below the background). The samples were prepared powdered and had, as initial composition, mainly: Ta2O5 (24.20)%, La2O3 (18.00%), CeO2 (6.30%), Nd2O3 (2.35%), Pr6O11 (1.99%), Y2O3 (1.57%), ThO2(0.11%) and U3O8(0.035%). They were processed in the microwave batch reactor (2.45GHz, 2kW). After the processing, the results of characterization by X-Ray Fluorescence (FRX), Scanning Electron Microscopy (SEM) and Energy-Disperse X-Ray Spectroscopy (EDS) showed that the content of the main compounds of REEs, besides Th and U were: La2O3 (9.38%), CeO2 (20.00%), Nd2O3 (6.29%), Pr6O11 (3.58%), Y2O3 (2.57%), ThO2(0.33%) and U3O8(0.036%). This occurred in the samples prepared with distilled water and irradiated with 15bar of H2. These preliminary tests were promising, but more experiments are needed, since many variables may still be explored and laboratory infrastructure is available for this purpose, at IPEN-CNEN/SP. As the demand for the use of REEs is rapidly increasing, due to the various applications (for example, as neutron moderators in nuclear reactors, special magnets, TV screens, cell phones and computers, catalysts, missiles, electric vehicles, wind and solar energy, among others), future studies would make it possible to add value and improve the quality of this ore. Finally, microwave technology could be used as an alternative for the reuse of these elements contained in mineral exploration residues.
  • Artigo IPEN-doc 26275
    Evaluation of microwave technology in the additional purification of Mo-99, produced from LEU targets
    2019 - LANDINI, LILIANE; ARAUJO, SUMAIR G.; FORBICINI, CHRISTINA A.L.G.O.
    In the present work, the feasibility of the microwave technology was studied as an additional purification step (sublimation) in the production of Mo-99, via the alkaline dissolution of LEU (low enrichment uranium) targets of UAlx/Al, in the RMB (Brazilian Multipurpose Reactor) project, which is usually accomplished by induction furnace. The intention was to decrease the time spent in this purification step, for later comparison between the methods. Thus, non-radioactive samples of sodium molybdate (solution) and appropriate catalysts/materials (which could withstand up to 1300°C) were prepared and employed. All experiments were performed in a microwave oven scale (1000W/2.45GHz), under atmospheric pressure. Considering that the experiments with induction furnace lasted from 1.5h to 2h for the sublimation of oxide and molybdenum separation, the preliminary results, obtained in this study, demonstrated the time savings and the possibility of reaching temperatures up to 1200°C in less than 30 minutes. Therefore, the use of this technique is considered promising for this application, although other studies and specific devices are required.
  • Resumo IPEN-doc 25424
    Estudo da viabilidade de produção de biodiesel, a partir de óleos vegetais e catalisadores de resíduos de frutos do mar, em uma unidade reacional de hidrogenação em batelada, assistida por micro-ondas e aquecimento convencional
    2018 - ARAUJO, S.A. de; LANDINI, L.; SALVADOR, V.L.R.; SCAPIN, M.A.; MASSANARES, B.F.; URBANINHO, A.B.
    Neste trabalho a proposta foi a realização de estudo da viabilidade da produção de biodiesel, partir de resíduos de óleos vegetais de atividades domésticas, empregando resíduos de conchas (CaCO3), preparados na forma de óxido de cálcio (CaO) como catalisadores, em uma unidade de reação em batelada, em escala de bancada, instalada no IPEN-CNEN/SP. Ela é capaz de operar com alta pressão de gás hidrogênio (até 200bar) e alta temperatura (até 500°C), utilizando micro-ondas (2.450MHz, com até 2kW contínuo e 8kW pulsado) e aquecimento convencional (elétrico). Nos testes, foram avaliadas as carga de óleo (mL); tipo e massa de catalisador, com ou sem pressão de gás hidrogênio (bar); temperatura (°C); tempo de reação (h); potência de micro-ondas (W); velocidade de agitação da carga (rpm); aquecimento convencional (MC). As determinações analíticas das amostras foram feitas por meio de densidade, cromatografia em fase gasosa (GC), titulação potenciométrica e fluorescência de raios-X. Foram levantados dados, a fim de compará-los com outras metodologias já utilizadas em literatura. A proposta deste trabalho foi analisar a eficiência do uso destes tipos de catalisadores e óleos, na produção de biodiesel, como uma tecnologia alternativa.
  • Resumo IPEN-doc 17615
    Microwave energy applied to chloroprene rubber devulcanization
    2011 - SCAGLIUSI, SANDRA R.; ARAUJO, SUMAIR G. de; LANDINI, LILIANE; LUGAO, ADEMAR B.
  • Resumo IPEN-doc 16308
    Microwave energy applied to chloroprene rubber devulcanization
    2008 - SCAGLIUSI, S.R.; ARAUJO, S.G. de; LANDINI, L.; LUGAO, A.B.
  • Resumo IPEN-doc 16299