NIKOLAS LYMBERIS SCURO

NIKOLAS LYMBERIS SCURO

Página do item completo

Resultados de Busca

Agora exibindo 1 - 7 de 7

RANS-based CFD calculation for pressure drop and mass flow rate distribution in an MTR fuel assembly
2021 - SCURO, N.L.; ANGELO, G.; ANGELO, E.; UMBEHAUN, P.E.; TORRES, W.M.; SANTOS, P.H.G.; FREIRE, L.O.; ANDRADE, D.A.
This work presents a Reynolds-averaged Navier Stokes–based computational fluid dynamics methodology for the calculation of pressure drop and mass flow rate distribution in a material test reactor flat-plate-type standard fuel assembly (SFA) of the IEA-R1 Brazilian research reactor to predict future improvements in newer SFA designs. The results improve the understanding of the origin of fuel plate oxidation due to high temperatures, and consequently, due to the internal flow dynamics. All numerical analyses were performed with the ANSYS-CFX® commercial code. The observed results show that the movement pin decreases the central channel mass flow due to the length of the vortex at the inlet region. However, the outlet nozzle showed greater general influence in the flow dynamics. It should have a more gradual cross-section transition being away from the fuel plates or a squarer-shaped design to get a more homogeneous mass flow distribution. Optimizing both regions could lead to a better cooling condition. The validation of the IEA-R1 numerical methodology was made by comparing the McMaster University’s dummy model experiment with a numerical model that uses the same numerical methodology. The experimental data were obtained with laser Doppler velocimetry, and the comparison showed good agreement for both pressure drop and mass flow rate distribution using the Standard k-ω turbulence model.
A simulation model for capacity planning of nuclear fuel plants for research reactors
2021 - NEGRO, M.L.N.; DURAZZO, M.; MESQUITA, M.A.; SCURO, N.L.; CARVALHO, E.F.U.; ANDRADE, D.A.
The demand for nuclear fuel for research reactors is increasing worldwide. However, some nuclear fuel factories have low production volumes. Literature regarding how to expand the capacity of those facilities in a safe and reliable way is scarce. Thus, the purpose of this work is to propose and validate a conceptual model for increasing the production capacity of such factories. The facilities addressed here are those that produce plate-type fuel elements loaded with LEU U3Si2-Al, which are typically used in nuclear research reactors. Data from a real nuclear fuel plant was collected and applied to the model, thus setting up a case study. Two different strategies, as well as several production scenarios, were conceived for the use of the model. Each scenario experiments with the different possibilities of enlarging capacity. Discrete events simulation was used in order to cover all production scenarios. The tests indicated significant increases in productive capacity, thus showing that the model fully achieved its proposed objective. One of the main conclusions to be highlighted is the model’s effectiveness, which was demonstrated by using the model in two different strategies and obtaining increases in capacity with both of them.
A CFD analysis of blockage length on a partially blocked fuel rod
2019 - SCURO, N.L.; UMBEHAUN, P.E.; ANGELO, E.; ANGELO, G.; ANDRADE, D.A.
After a loss of coolant accident (LOCA), fuel rods may balloon. The swelling can partially block the flow channel, affecting the coolability during reflood phase. In order to analyze the influence of blockage length, using a radial block-age of 90%, varying just the blockage length, many steady state numerical simulations has been done using Ansys-CFX code to verify thermal-hydraulic properties according to different forced cooled conditions. Temperature peaks are observed on cladding, followed by a temperature drop. A 5x5 fuel assembly, with 9 centered ballooned fuel rod, flow redistribution inside channels can also be captured, indicating an overheating zone. Therefore, this study conclude, for the same boundary conditions, the longer the blockage length originated after LOCA events, the higher are the clad temperatures, indicating the possibility of overheat during transient conditions on reflood.
Simulação numérica de um acidente tipo perda lenta de vazão em um reator nuclear de pesquisa
2019 - SCURO, NIKOLAS L.
As simulações numéricas de acidentes em reatores nucleares de pesquisa necessitam de constante aprimoramento, originando metodologias validadas, o que permite aproximar os cálculos numéricos a um comportamento físico. O trabalho proposto consiste em elaborar uma metodologia numérica tridimensional para análise de um acidente tipo perda lenta de vazão, comumente nomeado de SLOFA, do inglês, slow loss of flow accident, para o reator nuclear IEA-R1. Utilizando códigos numéricos para escoamentos tridimensionais (ANSYS CFX®) foi possível observar a dinâmica do escoamento, prever a localização da temperatura máxima do revestimento e o instante da inversão do sentido de escoamento. Sete modelos de turbulência foram analisados individualmente para elaboração da metodologia, porém, inúmeras dificuldades foram observadas no processo de solução para os modelos ZE, EVTE, SSG, k - ε, k - ω, SST e DES. O modelo que atendeu aos requisitos estabelecidos, entre eles, tempo computacional e solução numérica compatível com solução física, foi o modelo de turbulência k - ω. Entre as justificativas para este resultado pode-se citar a ausência da lei logarítmica de parede e simplicidade na solução das equações de transporte para condição analisada. Os resultados apresentaram alinhamento quantitativo e qualitativo com as curvas de temperatura experimentais. Nas condições de regime permanente quanto para o regime transiente, o desvio máximo observado foi de 3,4°C para temperatura. As curvas de temperatura numérica capturam o mesmo comportamento físico observado nos testes experimentais, tanto no instante da inversão do escoamento, quanto no início da perda dos efeitos do empuxo. Portanto, esta metodologia tridimensional representa um avanço frente aos resultados apresentados pelos códigos unidimensionais reportados na literatura (RELAP, MERSAT, CATHARE) para a mesma base de dados experimental, visto que o desvio médio observado nestes códigos é de 7,2°C.
Transient cfd analysis of the flow inversion of the nuclear research reactor IEA-R1
2018 - SCURO, N.L.; SANTOS, P.G.; UMBEHAUN, P.E.; ANDRADE, D.A.; ANGELO, E.; ANGELO, G.
The IEA-R1 research reactor works with a downflow direction, but after pumps shutdown during a LOFA test, the reactor shutdown. The heat decay will be removed by natural convection, which is an upward flow, originating flow inversion. Using the Instrumented Fuel Element designed at the Institute for Energy and Nuclear Research (IPEN), the loss of flow accident (LOFA) was analyzed along instrumented fuel plates. The preliminary results showed temperature peaks during inversion, which is as much representative as in nominal operation at 3.5MW. Therefore, these experimental data lead a construction and validation of a transient three-dimensional numerical analysis for a single fuel channel using the ANSYS-CFX® commercial code. The numerical results show improvement in obtaining more properties, e.g., wall heat transfer coefficient, which is usually obtained through empirical correlations.
CFD analysis of blockage length on a partially blocked fuel rod
2017 - SCURO, N.L.; ANGELO, G.; ANGELO, E.; ANDRADE, D.A.
In LOCA accidents, fuel rods may balloon by the increasing of pressure difference between fuel rod and core vessel. With the balloon effect, the swelling can partially block the flow channel, affecting the coolability during reflood phase. In order to analyze the influence of blockage length after LOCA events, many numerical simulations using Ansys-CFX code have been done in steady state condition, characterizing the final phase of reflood. Peaks of temperature are observed in the middle of the fuel rod, followed by a temperature drop. This effect is justified by the increasing of heat transfer coefficient, originated from the high turbulence effects. Therefore, this paper considers a radial blockage of 90%, varying just the blockage length. This study observed that, for the same boundary conditions, the longer the blockage length originated after LOCA events, the higher are the central temperatures in the fuel rod.
CFD analysis of blockage length on a partially blocked fuel rod
2017 - SCURO, NIKOLAS L.; ANGELO, GABRIEL; ANGELO, EDVALDO; ANDRADE, DELVONEI A. de
In LOCA accidents, fuel rods may balloon by the increasing of pressure difference between fuel rod and core vessel. With the balloon effect, the swelling can partially block the flow channel, affecting the coolability during reflood phase. In order to analyze the influence of blockage length after LOCA events, many numerical simulations using Ansys-CFX code have been done in steady state condition, characterizing the final phase of reflood. Peaks of temperature are observed in the middle of the fuel rod, followed by a temperature drop. This effect is justified by the increasing of heat transfer coefficient, originated from the high turbulence effects. Therefore, this paper considers a radial blockage of 90%, varying just the blockage length. This study observed that, for the same boundary conditions, the longer the blockage length originated after LOCA events, the higher are the central temperatures in the fuel rod.