ESPERIDIANA AUGUSTA BARRETOS DE MOURA

Resumo

Graduated in Chemical Engineering at Faculdade Oswaldo Cruz (1983), Master in Nuclear Technology - Applications at IPEN / USP (1999), Ph.D. in Nuclear Technology - Applications at IPEN / USP (2006) and Post-Doctorate at Center for Advanced Materials ( T-CAM) from Tuskegee University, AL, USA. The main lines of research are: Synthesis of metallic nanoparticles; Obtaining and characterization of nanoparticles from mineral activity and agroindustry residues; Micro and nanofiller functionalization; Synthesis and reduction of graphene oxide; Development and modification of composite materials based on conventional and biodegradable polymers with vegetable fibers, micro and nanofillers of renewable origin; Development of biodegradable, active and intelligent plastic packaging for food, cosmetics, medical and pharmaceutical products; Development of conductive polymeric materials; Development of biomaterials for application in the regeneration of bone and dental tissue. (Text obtained from the Currículo Lattes on October 8th 2021)


Possui graduação em Engenharia Química pela Faculdade Oswaldo Cruz (1983), mestrado em Tecnologia Nuclear ? Aplicações pelo IPEN/USP (1999), doutorado em Tecnologia Nuclear ? Aplicações pelo IPEN/USP (2006) e Pós-Doutorado no Center for Advanced Materials (T-CAM) da Tuskegee University, AL, USA. As principais linhas de pesquisa são: Síntese de nanopartículas metálicas; Obtenção e caracterização de nanopartículas a partir de resíduos da atividade mineral e da agroindústria; Funcionalização de micro e nanocargas; Síntese e redução de óxido de grafeno; Desenvolvimento e modificaçao de materiais compósitos baseados em polímeros convencionais e biodegradáveis com fibras vegetais, micro e nanocargas de origem renovável; Desenvolvimento de embalagens plásticas biodegradáveis, ativas e inteligentes para alimentos, cosméticos, produtos médicos e farmacêuticos;Desenvolvimento de materiais poliméricos condutores; Desenvolvimento de biomateriais para aplicação na regeneração de tecidos ósseos e dentários. (Texto extraído do Currículo Lattes em 08 out. 2021)

Projetos de Pesquisa
Unidades Organizacionais
Cargo

Resultados de Busca

Agora exibindo 1 - 2 de 2
  • Artigo IPEN-doc 29697
    Influence of reinforcing efficiency of clay on the mechanical properties of poly(butylene terephthalate) nanocomposite
    2023 - COLOMBO, MARIA A.S.; DIAZ, FRANCISCO R.V.; KODALI, DEEPA; RANGARI, VIJAYA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
    In contrast to traditional fillers, clay, in particular, natural smectite clay, represents an environmentally significant alternative to improve the properties of polymers. Compared to conventional nanofillers, smectite clay can effectively enhance the physical and mechanical properties of polymer nanocomposites with a relatively small amount of addition (<5 wt%). The present study focuses on investigating the reinforcing efficiency of different amounts (up to 5 wt%) of a natural Brazilian smectite clay modified (MBClay) on the mechanical properties of poly(butylene terephthalate) (PBT) nanocomposites and also evaluates the correlation between MBClay addition and the mechanical and thermal behaviors of the PBT/MBClay nanocomposites. Natural Brazilian clay modified by the addition of quaternary salt and sodium carbonate (MBClay) was infused into the PBT polymer by melt extrusion using a twin-screw extruder. It was found that the best properties for PBT were obtained at 3.7 wt% of modified BClay. Tensile strength at break exhibited increased by about 60%, flexural strength increased by 24%, and flexural modulus increased by 17%. In addition, an increase in the crystallinity percentage of PBT/BClay nanocomposite was confirmed by DSC and XRD analysis, and a gain of about 45% in HDT was successfully achieved due to the incorporation of 3.7 wt% of MBClay
  • Capítulo IPEN-doc 25624
    Comparative study of the use of rice husk ashes and graphite as fillers in polypropylene matrix composites
    2019 - MONTEIRO, ALEX S.; BARREIRA, DAILI A.S.; BARTOLOMEI, SUELLEN S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B. de
    In recent years, carbonaceous materials have been widely studied for polymer composite applications due to its capability to improve the engineering properties of the polymeric matrix. Among various carbonaceous fillers, carbon nanotube, graphene, and graphite promise to be a suitable reinforcement of polymers. Rice husk ash (RHA), a large residue rich in carbon and silica produced by the burning of rice husk offers also an immense potential as a carbonaceous filler for polymer composites on account of its lowcost, lowdensity, high strength and elastic modulus, no health risks, and renewability. This work aims at studying the effects of RHA and graphite as fillers in polypropylene (PP) matrix composites. The composites PP/RHA and PP/graphite were produced by melting extrusion process. The materials obtained were subjected to mechanical tests, XRD, TG, and FEG-SEM analyses. Comparison studies between neat PP properties and its composites were carried out.