SILAS CARDOSO DOS SANTOS

SILAS CARDOSO DOS SANTOS

Página do item completo

Resultados de Busca

Agora exibindo 1 - 7 de 7

Correlation between zeta potential and electron paramagnetic resonance of thulium, europium co-doped yttria based suspensions
2024 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
The formation of advanced ceramic components with homogeneous microstructure and functional characteristics demands a suitable control of particle dispersion. Thus, the characterization of particle stability as immersed in a liquid medium is important. The present paper reports an approach to evaluate the stability of europium, thulium co-doped yttria (YET) nanoparticles by a correlation between zeta potential and Electron Paramagnetic Resonance (EPR) techniques. Based on results, YET suspensions exhibited high stability apart from pH 10, while their isoelectric point presented a slight variation from pHIEP 8.5 to 9.2 according to thulium content 0 and 2 at.%, respectively. The peak-to-peak amplitude of EPR spectra of the YET suspensions increased as pH shifted toward alkaline condition, following zeta potential curves features. The present achievements are very useful parameters to form stable suspensions based on rare-earth oxides and to advance toward new materials for radiation dosimetry.
Building up europium thulium co-doped yttria nanoparticles with electron paramagnetic resonance response by colloidal synthesis
2023 - SANTOS, SILAS C. dos; RODRIGUES JR., ORLANDO; CAMPOS, LETICIA L.
In the radiation dosimetry field the research for new materials is a continuos demand with the aim to provide highly improvement procedures where ionizing radiation is used. Considering this challenge, the present work reports the colloidal synthesis of europium-thulium-co-doped yttria powders (YET) and evaluates the dopants effect on the promotion of EPR response of yttria. The powdered compositions prepared with up to 2at.%Tm and 2at.%Eu (at.%, atomic percentage) were evaluate by XRD, PCS, SEM, and EPR. Based on the results, the proposed synthesis method provided ceramic powders with cubic C-type form and mean particle size (d50) less than 160nm. The most significant EPR dose-response was noticed for the powdered composition prepared with 0.5at. %Tm (YET0.5) as irradiated with 5kGy (60Co). These findings are key parameters to advance toward the formation of new materials for radiation dosimetry.
Evaluation of rare-earth sesquioxides nanoparticles as a bottom-up strategy toward the formation of functional structures
2022 - SANTOS, SILAS C. dos; RODRIGUES JUNIOR, ORLANDO; CAMPOS, LETICIA L.
Background: The strategy to form functional structures based on powder technology relies on the concept of nanoparticles characteristics. Rare-earth sesquioxides (RE2O3; RE as Y, Tm, Eu) exhibit remarkable properties, and their fields of application include energy, astronomy, environmental, medical, information technology, industry, and materials science. The purpose of this paper is to evaluate the characteristics of RE2O3 nanoparticles as a bottom-up strategy to form functional materials for radiation dosimetry. Methods: The RE2O3 nanoparticles were characterized by the following techniques: XRD, SEM, PCS, FTIR, ICP, EPR, and zeta potential. Results: All RE2O3 samples exhibited cubic C-type structure in accordance with the sesquioxide diagram, chemical composition over 99.9 %, monomodal mean particle size distribution, in which d50 value was inferior to 130 nm. Among all samples, only yttrium oxide exhibited an EPR signal, in which the most intense peak was recorded at 358mT and g 1.9701. Conclusion: Evaluating nanoparticle characteristics is extremely important by considering a bottom-up strategy to form functional materials. The RE2O3 nanoparticles exhibit promising characteristics for application in radiation dosimetry.
Synthesis, processing, and electron paramagnetic resonance response of Y1.98Eu0.02O3 micro rods
2018 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
Innovating dosimetric materials, which includes design and development of new dosimetric materials based on rare earth oxides, is challenging. Yttrium oxide (Y2O3) is one of the most important sesquioxides and presents crystal characteristics that enable doping with rare earth ions, making it a promising material for radiation dosimetry. This paper reports on the development and measurement of Electron Paramagnetic Resonance (EPR) signal response for Y1.98Eu0.02O3 micro rods that have undergone facile low-pressure hydrothermal synthesis and bio-prototyping. Assynthesized powders with narrow sub-micrometer particle size distribution with d50 of 584 nm exhibited a reactive surface, which led to the formation of stable aqueous suspensions by controlling the surface charge density of particles through alkaline pH adjustment. Ceramic samples with dense microstructure were formed by sintering at 1600 ºC for 4h at ambient atmosphere. Y1.98Eu0.02O3 micro rods were irradiated using a 60Co source with doses from 1 to 100 kGy, and EPR spectra were measured at room temperature in X-band microwave frequencies. Sintered samples exhibited linearity of the main EPR signal response from 10 Gy to 10 kGy. Supralinearity was observed for higher doses, which is possibly ascribed to formation of more defects. Using europium as a dopant enhanced the EPR signal of yttrium rods remarkably, due to 4f–4f transitions of the Eu3+ ion. These innovative findings make europium-doped yttrium oxide a promising material for radiation dosimetry.
EPR response of yttria micro rods activated by europium
2018 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
Rare earth (RE) materials present excellent properties, which importance is recognized worldwide. Innovation approaches in energy, medicine, communication, transportation, militarism, and radiation dosimetry consist in RE based materials. As yttrium oxide (Y2O3) exhibits intrinsic lattice characteristics that enable doping with others RE elements (Y2O3:RE), new materials with promising characteristics can be developed. This work aims to evaluate EPR response of europium-yttria (Y2O3:Eu) rods obtained by bio-prototyping. Ceramic rods containing up to 10 at.%Eu were irradiated with gamma doses from 0.001 to 150 kGy and evaluated by Electron Paramagnetic Resonance (EPR) at room temperature with X-band EPR. Based on results, Y2O3:Eu rods with 2 at.%Eu exhibited the most significant response, in which linear behavior arose from 0.001 up to 50 kGy. Fading and thermal annealing evaluations revealed that 2 at%.Eu improved dosimetric characteristics of yttria remarkably. These innovative findings afford that Y2O3:Eu is a promising material for radiation dosimetry.
EPR dosimetry of yttria micro rods
2018 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
The use of rare earths (RE) as dopant of materials has led the development of advanced materials for many applications such as optical tracers, special alloys, semiconductors, as well as radiation dosimeters. The development of new dosimetric materials based on REs is a great challenge in innovation of materials. Yttria (Y2O3) presents luminescent proprieties and is a promising material for radiation dosimetry. The present paper aims to evaluate paramagnetic defects of Y2O3 rods obtained via bio-prototyping by using Electron Paramagnetic Resonance (EPR) technique at room temperature. Ceramic rods were irradiated with gamma doses from 0.001 to 150 kGy and evaluated by EPR at room temperature with X-band EPR. According to EPR results, as sintered samples exhibited an EPR signal with principal g tensor of 2.020 and maximum line width around 2.3 mT, which is ascribed to interstitial oxygen ion. Dose response behaviour exhibited two distinct dose ranges, one is from 1 to 100Gy and the second is from 0.1 to 70 kGy. Thermal annealing approaches reveal that defect centres of yttria decay significantly at high temperature. These innovative results make Y2O3 a promising material for radiation dosimetry.
Bio-prototyping of europium-yttria based rods for radiation dosimetry
2017 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
The application of solid state dosimeters in radiation protection has grown significantly as consequence of advances in the development of dosimetric materials using rare earths. The conception of new dosimetric materials concerns synthesis methods, which control the evolution of material structure, including further processing steps as, shaping, drying, and sintering. The present study reports a full bio-prototyping approach to produce europium doped yttria rods with potential application in radiation dosimetry. Ceramic particles synthesized by hydrothermal route were characterized by Photon Correlation Spectroscopy (PCS), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM). The effect of europium on promoting electronic defects in yttria host was evaluated by Electron Paramagnetic Resonance (EPR). Low pressure hydrothermal synthesis led to formation of rounded particles with mean diameter of 410 nm. Aqueous suspensions with 20 vol% of particles prepared at pH 10, and 0.2 wt% binder exhibited apparent viscosity of 213 mPa s, being suitable for bio-prototyping of rods. Sintering of shaped samples at 1600 degrees C for 4 h provided formation of dense ceramic rods. Europium-yttria rods containing 5 at.% Eu exhibited the most intense EPR response.