SILAS CARDOSO DOS SANTOS

SILAS CARDOSO DOS SANTOS

Página do item completo

Resultados de Busca

Agora exibindo 1 - 6 de 6

Correlation between zeta potential and electron paramagnetic resonance of thulium, europium co-doped yttria based suspensions
2024 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
The formation of advanced ceramic components with homogeneous microstructure and functional characteristics demands a suitable control of particle dispersion. Thus, the characterization of particle stability as immersed in a liquid medium is important. The present paper reports an approach to evaluate the stability of europium, thulium co-doped yttria (YET) nanoparticles by a correlation between zeta potential and Electron Paramagnetic Resonance (EPR) techniques. Based on results, YET suspensions exhibited high stability apart from pH 10, while their isoelectric point presented a slight variation from pHIEP 8.5 to 9.2 according to thulium content 0 and 2 at.%, respectively. The peak-to-peak amplitude of EPR spectra of the YET suspensions increased as pH shifted toward alkaline condition, following zeta potential curves features. The present achievements are very useful parameters to form stable suspensions based on rare-earth oxides and to advance toward new materials for radiation dosimetry.
Synthesis of thulium-yttria nanoparticles with EPR response
2022 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
Approaches to form new materials for radiation dosimetry are essential to enhance quality assurance and quality improvement practices based on radiation protection concept. The present work reports a hydrothermal synthesis based on a relative low temperature and pressure to form thulium-yttria nanoparticles with electron paramagnetic resonance response. Thulium-yttria nanoparticles were prepared and characterized by XRD, SEM, PCS, and EPR. According to results, the hydrothermal method provided thulium-yttria nanoparticles with cubic C-type structure, mean particle size (d50) less than 160nm, and EPR response. The EPR spectra of powders exhibited two resonance peaks p1 and p2 recorded at 350 and 160mT, respectively. The enhancement of the EPR response of yttria by the use of thulium as a dopant provide meaningful parameters to advance in the formation of new rare earth-based materials for radiation dosimetry.
Formation and EPR response of europium-yttria micro rods
2019 - SANTOS, SILAS C. dos; RODRIGUES JUNIOR, ORLANDO; CAMPOS, LETICIA L.
Designing new materials with suitable dose-response efficiency is a great challenge in radiation dosimetry search. Yttria (Y2O3) has excellent optical, mechanical, chemical, and thermal properties. Besides, yttria exhibits crystal characteristics that provide insertion of other rare earths, forming innovative materials. Nevertheless, there are quite few studies on formation, microstructural and EPR response evaluation of yttria. This work reports the formation and EPR characterization of europium-yttria micro rods for radiation dosimetry. Ceramic rods obtained by sintering at 1600ºC/4h in air were exposed to gamma radiation with doses from 1Gy to 150kGy. Particle, microstructural and dosimetry characterizations were performed by PCS, XRD, SEM, OM, and EPR techniques. As sintered europiumyttrium rods exhibited dense microstructure (90% theoretical density) and linear EPR dose response behavior up to 10kGy. These results show that europium-yttria is a promising material for radiation dosimetry.
Synthesis, processing, and electron paramagnetic resonance response of Y1.98Eu0.02O3 micro rods
2018 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
Innovating dosimetric materials, which includes design and development of new dosimetric materials based on rare earth oxides, is challenging. Yttrium oxide (Y2O3) is one of the most important sesquioxides and presents crystal characteristics that enable doping with rare earth ions, making it a promising material for radiation dosimetry. This paper reports on the development and measurement of Electron Paramagnetic Resonance (EPR) signal response for Y1.98Eu0.02O3 micro rods that have undergone facile low-pressure hydrothermal synthesis and bio-prototyping. Assynthesized powders with narrow sub-micrometer particle size distribution with d50 of 584 nm exhibited a reactive surface, which led to the formation of stable aqueous suspensions by controlling the surface charge density of particles through alkaline pH adjustment. Ceramic samples with dense microstructure were formed by sintering at 1600 ºC for 4h at ambient atmosphere. Y1.98Eu0.02O3 micro rods were irradiated using a 60Co source with doses from 1 to 100 kGy, and EPR spectra were measured at room temperature in X-band microwave frequencies. Sintered samples exhibited linearity of the main EPR signal response from 10 Gy to 10 kGy. Supralinearity was observed for higher doses, which is possibly ascribed to formation of more defects. Using europium as a dopant enhanced the EPR signal of yttrium rods remarkably, due to 4f–4f transitions of the Eu3+ ion. These innovative findings make europium-doped yttrium oxide a promising material for radiation dosimetry.
EPR response of yttria micro rods activated by europium
2018 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
Rare earth (RE) materials present excellent properties, which importance is recognized worldwide. Innovation approaches in energy, medicine, communication, transportation, militarism, and radiation dosimetry consist in RE based materials. As yttrium oxide (Y2O3) exhibits intrinsic lattice characteristics that enable doping with others RE elements (Y2O3:RE), new materials with promising characteristics can be developed. This work aims to evaluate EPR response of europium-yttria (Y2O3:Eu) rods obtained by bio-prototyping. Ceramic rods containing up to 10 at.%Eu were irradiated with gamma doses from 0.001 to 150 kGy and evaluated by Electron Paramagnetic Resonance (EPR) at room temperature with X-band EPR. Based on results, Y2O3:Eu rods with 2 at.%Eu exhibited the most significant response, in which linear behavior arose from 0.001 up to 50 kGy. Fading and thermal annealing evaluations revealed that 2 at%.Eu improved dosimetric characteristics of yttria remarkably. These innovative findings afford that Y2O3:Eu is a promising material for radiation dosimetry.
EPR dosimetry of yttria micro rods
2018 - SANTOS, S.C.; RODRIGUES JUNIOR, O.; CAMPOS, L.L.
The use of rare earths (RE) as dopant of materials has led the development of advanced materials for many applications such as optical tracers, special alloys, semiconductors, as well as radiation dosimeters. The development of new dosimetric materials based on REs is a great challenge in innovation of materials. Yttria (Y2O3) presents luminescent proprieties and is a promising material for radiation dosimetry. The present paper aims to evaluate paramagnetic defects of Y2O3 rods obtained via bio-prototyping by using Electron Paramagnetic Resonance (EPR) technique at room temperature. Ceramic rods were irradiated with gamma doses from 0.001 to 150 kGy and evaluated by EPR at room temperature with X-band EPR. According to EPR results, as sintered samples exhibited an EPR signal with principal g tensor of 2.020 and maximum line width around 2.3 mT, which is ascribed to interstitial oxygen ion. Dose response behaviour exhibited two distinct dose ranges, one is from 1 to 100Gy and the second is from 0.1 to 70 kGy. Thermal annealing approaches reveal that defect centres of yttria decay significantly at high temperature. These innovative results make Y2O3 a promising material for radiation dosimetry.