Practical leak detection and leak rate measurement applied to a hot cell for radiopharmaceutical preparations in a GMP-compliant laboratory
Carregando...
Data
Data de publicação
Orientador
Título da Revista
ISSN da Revista
Título do Volume
É parte de
É parte de
É parte de
Brazilian Journal of Radiation Sciences
Exportar
Resumo
Hot cells are containment systems used in radiopharmaceutical production, designed to ensure radiation protection and product quality. Leak tightness testing is a mandatory requirement under CNEN NN 6.13 standard, as it directly impacts worker safety, environmental protection, and product integrity. This study aimed to perform a practical pressure change leak test in a hot cell used for radiopharmaceutical preparations, in accordance with applicable technical standards. The pressure change method was applied using pressures between 1.6 and 2.5 times the working pressure for a testing time of 15 minutes. The method proved practical, requiring no highly specialized equipment, although its sensitivity to temperature highlights the importance of a high-precision thermometer. Results showed that while the method is suitable for ISO 10648-2:1994 Class 2 compliance, it may not be adequate for Class 1 due to the risk of mathematically inaccurate results under temperature variations. Multiple rounds of leak detection and repair were required to achieve the required containment level. Overall, the DC, RIC, CIC, and Solid Waste chambers met Class 2 leak tightness requirements, being suitable for use in radiopharmacy facilities.
Como referenciar
SANTOS, R. S.; ZAPPAROLI, C. L.; SANTOS, J. M.; CAETANO, G. F. R.; CAVALCANTI, M. G. P.; ANDRADE, D. A. Practical leak detection and leak rate measurement applied to a hot cell for radiopharmaceutical preparations in a GMP-compliant laboratory. Brazilian Journal of Radiation Sciences, v. 14, n. 1, p. 1-17, 2026. DOI: 10.15392/2319-0612.2026.3004. Disponível em: https://repositorio.ipen.br/handle/123456789/49877. Acesso em: 24 Jun 2026.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.